The setting technique and firmness of moissanite rings

Inlay techniques and firmness analysis

1. Claw setting

Firmness: Prong setting is one of the most commonly used and firm techniques in jewelry setting, especially suitable for moissanite. Prong setting tightly holds the gemstone through metal claws, with less obstruction from the metal to the gemstone, which can fully display the luster of moissanite.

Detailed features:

Three-prong setting: Symbolizing "I love you", the stable triangle formed by three points implies the unbreakable nature of love. However, due to the few points of force application, if one of the prongs deforms or becomes loose, the gemstone is prone to fall off.

Four-prong setting: Symbolizing "love for a lifetime", it is suitable for square-cut moissanite, which can reduce the part of the gemstone that is covered. However, if one prong is broken or loose, the gemstone is also prone to fall off.

Six-prong setting: The most popular setting method. The crown-like shape symbolizes cherishing. The six-prong setting is tighter. Even if one of the prongs is damaged, the gemstone is less likely to fall off, thus providing higher stability.

2. Inlay

Firmness: The setting is the most secure and traditional method. A metal edge is used to seal the moissanite from the waist down in a metal support. There is no gap between the set gemstone and the edge, and it is firmly fixed and not easy to fall off.

Detailed features: The setting style is traditional and understated, low-key and grand. However, the metal often blocks the gemstone, and the gemstone's luster is not as dazzling as that of the prong setting.

3. Insert (Card insert)

Firmness: The inlay uses the tension of the metal to fix the moissanite between the metal supports, making it look as if the gemstone is suspended between two metal supports. Although the exposed area is larger than that of prong setting and has stronger light transmission, the force-bearing point is smaller. If the slot is opened too large or subjected to external force impact, the gemstone is very likely to loosen or even fall off.

Detailed features: The setting technique is highly demanding. It is suitable for large-grained moissanite and the size cannot be modified. It is recommended to determine the ring size before customization.

4. Track inlay

Firmness: The track setting continuously inlays moissanite in the metal track, using the metals on both sides to support the gemstones. The inlaid gemstones are relatively firm and less likely to be damaged.

Detailed features: The track setting visually looks neat and smooth, with a smooth surface that is less likely to catch clothes. However, it has high requirements for the craftsman's skills, and the gemstones are prone to damage during the setting process.

5. Nailing

Firmness: Nailing takes advantage of the malleability of metal. Small nails are chiseled out from the edge of the setting on the metal material to fix the gemstone. The metal claws for fixing the gemstone are not visible on the surface. Although it can highlight the dazzling luster of gemstones, if the entire ring is set with nails, it is difficult to change its size later on. It is also not suitable for setting a single gemstone, and improper force may even cause the diamond to fall off.

Detailed features: Nailing is often used for group setting of Moissanite diamonds, serving as an embellishment for luxury models.

6. Gypsy inlay (embedded inlay, hidden inlay)

Firmness: In Gypsy setting, the moissanite is set into a hole that can cover the waist of the gemstone. The gemstone is fixed by hammering the surrounding metal, and the part of the moissanite will not be exposed, as if it were buried in the metal. Under this setting method, the gemstone is very safe and firm, and is not easy to loosen or fall off.

Detailed features: Gypsy setting is suitable as a wedding ring, especially for men. It has a beautiful and elegant appearance. However, due to the fact that the gemstone is largely blocked by metal, less light enters the gemstone, and it cannot well display the fire of the gemstone.

7. Column inlay

Firmness: The column setting uses slender metal strips to separate each moissanite independently. Although this can better protect the gemstones, it is highly dangerous during the setting process, as the gemstones are prone to damage and are not as firm as other setting techniques.

Detailed features: Column setting is suitable for small-carat Moissanite, delicate and elegant, but the surface is not as smooth and flat as that of track setting.